Iron-on Apllication Instructions

Kwik Info, FAQ, Instructions to Apply as below, Materials and Tips.

FAQ :: Application Instructions :: Name Tape Materials :: Tips

Instructions to Iron-On

Applying Iron-On
The instructions to apply Kwik Tapes are printed on the backing paper of the Iron-On orders.

	Following these simple instructions will ensure that the nametapes stay permanently attached. The instructions are:-
1.	Set iron to "dry" mode, temp. 130-170 degrees (middle or wool setting).
2.	Holding iron flat, press the name tape in place for 10-15 seconds. DO NOT move the iron around.
3.	Allow the garment to cool down.
4.	Repeat steps 2 and 3 again (total of three pressings and coolings).
5.	Use a thin pressing cloth on delicate fabrics.